Broadcaster2.png
 
b2st.png

The Standard Broadcaster 2 (BC2-ST) is a remote engine controller that helps to simplify the process of operating diesel, natural gas, VFD or a combination of pumps. BC2-ST provides remote control of 8 pumps comfortably, whether mechanical or J1939 CAN Bus electronic engines. BC2-ST uses multi-band communication such as radio, cell/with satellite backup, and internet (cellular, Ethernet, WiFi). This system is controlled with our Rugged Tablet system where you can control and view multiple pumps at a time from one screen. BC2-ST has multiple built-in safeties and many different features to cater to a number of different industries and purposes such as agricultural, irrigation, water transfer, dewatering, series or parallel pump set-ups and municipal pumping.

  • Compatible with Broadcaster 1, Broadcaster 1+ and Broadcaster 2 w/Controls Inc.
  • Save money
  • Improve productivity
  • Reduce down time
  • Monitor worldwide
  • Constant communication

  • 12V or 24V systems
  • Auto-start engine controller, displays all reported SAE J1939 parameters and diagnostic messages from engine ECU
  • Rocker switch RPM control (digital, resistance)
  • Boost pump cruise control (auto RPM control based on inlet pressure)
  • Remote engine start/stop, includes warning beacon and audible alarm
  • Display engine coolant temperature, engine oil pressure (J1939 only)
  • Pump inlet and outlet pressure display and control
  • 3 engine-speed preset buttons (adjustable from tablet) plus idle
  • +/- 25 RPM speed increments
  • Manual RPM control
  • Heated LCD backlit display screen with push buttons (configurable)
  • 8 relay pack (SPST) ON/OFF or adjustable ON time, 4 double-acting electric over hydraulic valves, no proximity control (5 available)
  • Weather-proof enclosure

  • 12” Windows-based Rugged Tablet with Broadcaster pump interface program and diagnostic tools
  • Adjustable tablet holder with mounting hardware
  • BC2 Serial Power Module, w/serial cables
  • 900 MHz radio module kit
  • Optional multi-band communication; cell phone with satellite backup internet (Cell, Ethernet, WIFI)

  • Internet (cellular, Ethernet, WiFi)
  • Cellular with satellite backup
  • Mechanical RPM control – CAN Bus actuator
  • Flow metering, water temperature sensing
  • Tank level input
  • Telescoping antenna pole
  • Directional antenna
  • Repeater assembly – radio module with 12V battery case and tripod stand

  • Using pump cruise feature – run boost pumps automatically based on suction (inlet) pump pressures
  • Adjustable inlet and outlet pump pressure settings
  • Suction (inlet) pump pressure settings
    • If the pressure drops below low-values setting, the engine will start to RPM down to minimize cavitation of the pump
  • Discharge (outlet) pump pressure settings
    • If the pressure rises above high setting, the engine will start to RPM down to a lower pressure in the hose
    • Save hose from reaching a rupture pressure: set maximum hose protection pressure desired
    • Detects rapid outlet pump pressure drop (2 sec) due to rupture or disconnection of outlet hose or piping and will bring engine back to idle within seconds