Broadcaster 2 Controls Inc.

Broadcaster-2-CI.png

Broadcaster 2 with integrated Controls Inc. (BC2-CI) is a remote engine controller with a built-in Controls Inc. panel that simplifies your pump setup by having 2 units in 1. BC2-CI works on mechanical, electronic J1939 and VFDs or a combination of pumps. BC2-CI provides remote control of 8 pumps comfortably, and uses multi-band communication such as radio, cell/with satellite backup, and internet (cellular, Ethernet, WiFi). This system is controlled with our Rugged Tablet system where you can control and view multiple pumps at time from one screen. BC2-CI has multiple built-in safeties and many different features to cater to a number of different industries and purposes such as agricultural, irrigation, water-transfer, dewatering, series or parallel pump set-ups and municipal pumping.

  • Compatible with Broadcaster 1, Broadcaster 1+ and Broadcaster 2 Standard
  • 2-in-1 system
  • Easy installation
  • Save money
  • Improve productivity
  • Reduce down time
  • Monitor worldwide
  • Constant communication

  • 12V or 24V systems
  • Integrated Controls Inc. panel
  • Auto-start engine controller, displays all reported SAE J1939 parameters and diagnostic messages from engine ECU
  • Rocker switch RPM control (digital, resistance)
  • Boost pump cruise control (auto RPM control based on inlet pressure)
  • Remote engine start / stop, including warning beacon and audible alarm
  • Display engine coolant temperature, engine oil pressure (J1939 only)
  • Pump inlet and outlet pressure display and control
  • 3 engine-speed preset buttons (adjustable from tablet) plus idle
  • +/- 25 RPM speed increments
  • Manual RPM control
  • Heated LCD backlit display screen with push buttons (configurable)
  • 8 relay pack (SPST) ON/OFF or adjustable ON time, 4 double-acting electric over hydraulic valves, no proximity control (8 available)
  • Weather-proof enclosure

  • 12” Windows-based Rugged Tablet with Broadcaster pump interface program and diagnostic tools
  • Adjustable tablet holder with mounting hardware
  • BC2 Serial Power Module, w/serial cables
  • 900 MHz radio module kit
  • Optional multi-band communication; cell phone with satellite backup and internet (cellular, Ethernet, WiFi)

  • Internet (cellular, Ethernet, WiFi)
  • Cellular with satellite backup
  • Mechanical RPM control – CAN Bus actuator
  • Flow metering, water temperature sensing
  • Tank level input
  • Float level control
  • Fuel level sensing
  • Telescoping antenna pole
  • Directional antenna
  • Repeater assembly – radio module with 12V battery case and tripod stand

  • Using pump cruise feature – run boost pumps automatically based on suction (inlet) pump pressures
  • Adjustable inlet and outlet pump pressure settings
  • Suction (inlet) pump pressure settings
    • If the pressure drops below low-values setting, the engine will start to RPM down to minimize cavitation of the pump
  • Discharge (outlet) pump pressure settings
    • If the pressure rises above high setting, the engine will start to RPM down to a lower RPM
    • Save hose from reaching a rupture pressure: set maximum hose protection pressure desired
    • Detects rapid outlet pump pressure drop (2sec) due to rupture or disconnection of outlet hose or piping and will bring engine back to idle within seconds